Fordetailsontheoperation_ page80
Long exposure makes noise cunspicuous. When tile shutter speed is one secoud or slower.
noise reduction is activated to reduce the grainy noise that is commun in long exposures.
On When a long exposure of one second or longer takes place,
the noise reduction process is perfunned for the duration that
the shutter was ()pen. While the noise reduction is being
performed, the message "Processing..." appears on the LCD
monitor. You cannot take the next picture until the process is
over.
Off This mode does not perfurm noise reduction. This is suitable
when timing of shooting takes precedence. However, this
makes the noise more conspicuous. It is recommended that
you activate the noise reduction if you use long exposure.
• Noise reductiOll is noI pcrtorl/lcd on conlhluoLIs shooting or conlhltlOllS bracketing regardless ot tiffs
setting.
The fucus is cunfirmed when yuu louk into tile viewfiuder, and the shutter speed and aperlure
are ad.iusted autumalically.
On Aulomalically a({justs the focus.
• This mode uses up the bauery charge laster than [O11I.
Oft Does nol adjtlsl the lk)cus.
85
To Next Page
Loading...
