Fordetailsontheoperation_ page80
Autoflash When Ihe mode dial is set to AUTO, R or Scene Selection,
and the fllsh is pulled up, the flash fires automatically only
when the flash is necessary.
Fill-flash When the mode dial is set to AUTO, R or Scene Selection.
and the flash is pulled up, the flash fires ever?, time.
The order in bracket shooting (page 62) can be selected. The order is common to both ambient
light bracket and flash light bracket.
• This does nol apply 1o white balance bracket,
0_-_+ Use 0Ev in shooting the first picture which presents the best
shooting opportunity.
Example: 0Ev _ -0.3Ev _ +0.3Ev
-_ 0 _ + Ordered from low to high exposure.
Example: -0.7Ev ---+ 0Ev ---+ +0.7Ev
You can reset the main functions of the recording mode.
@ Select [Enter] in [1_ Reset].
The message "Reset recording mode?" appears on the LCD monitor.
@ Select [Yes] with _1on the controller, then press the center of the controller.
The main functions of the recording mode are reset.
• Fordetails onthe items 1obe re_t, see"Resel delaull" (page 151).
87
To Next Page
Loading...
