Changing
the
functions
of
the
button
and
dial
The function
of
the AEL button can be selected from the following two
functions:
- Holding the locked exposure value by pressing the AEL button while
the button is held down ([AEL hold]).
- Holding the locked exposure value by pressing the AEL button until the
bulton
is
pressed again ([AEL toggle]).
MENU
button
-+
0 1
-+
[AEl
button)
-+
Select
the
desired
setting
Noles
• While the exposure value is locked, *appears on the LCD monitor and in the
viewfinder. Be careful not to reset the selling.
• The "Hold" and "Toggle" sellings affect the manual shift (page 64)
in
the manual
mode.
When the recording mode
is
M (Manual exposure)
or
P (Program shift),
you can set the camera
to
that the adjustable item (the shutter speed
or
the
aperture value) can be selected using only the control dial.
It
is
convenient that you select commonly-used one when adjusting the
exposure.
MENU
button
-+
0 1
-+
[Ctrl
dial
setup)
-+
Select
the
desired
setting
120
To Next Page
Loading...
