Sony DSLR-A350 - Setting the Displayed Time of the Image Right after Shooting; Setting the Displayed Time of the LCD Monitor During Shooting; Setting the LCD Monitor

Setting the LCD monitor
MENU button ---+ ~ 1 ---+ [LCD brightness] ---+ Select the desired
setting
• On the recording information or playback screen, you can adjust the
brightness by pressing the DISP button a little longer.
You can check the recorded image on the LCD monitor right after the
shooting. You can change the displayed time.
MENU button ---+ 0 1---+ [Auto review] ---+ Select the desired
setting
Note
• In auto review, the image will not be displayed in the vertical position even if you
shot the image in a vertical position (page 101).
During shooting, the recording information display appears on the LCD
monitor. You can change the displayed time
of the display.
MENU button ---+ ~ 1 ---+ [lnfo.disp.time] ---+ Select the desired
setting
122