Copying
images
to
your
computer
This section describes how to copy images
in
a memory card to a computer
connected using a USB cable.
The following environment
is
recommended for a computer connected to
the camera to import images.
•
Windows
as (pre-installed): Microsoft Windows 2000 Professional
SP41
Windows
XP* SP2IWindows Vista*
• Operation is not assured
in
an environment based on
an
upgrade
of
the
operating systems described above or
in
a multi-boot environment.
*
M-bit
editions and Starter (Edition) are not supported.
USB jack: Provided as standard
•
Macintosh
as (pre-installed): Mac as x
(vIa.
1.3
or later)
USB jack: Provided as standard
Notes
on
connecting
your
camera
to
a
computer
• Operations are not guaranteed
for
all the recommended computer environments
mentioned above.
• If you connect
two
or more USB devices to a single computer
at
the
same time, some
devices, including your camera, may not operate, depending on the types
of
USB
devices you
are
using.
• Operations are not guaranteed when using a USB hub
or
an extension cable.
• Connecting your camera using a USB interface that is compatible with Hi-Speed
USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this
camera is compatible with Hi-Speed USB (USB 2.0 compliant).
• When your computer resumes from a suspend
or
sleep mode, communication
between your camera and your computer may not recover at the same time.
•
<
CD
::IE
::s
Ie>
3
l»
Ie>
CD
en
C>
::s
l»
.,
o
3
'C
c:
-
CD
~
127
To Next Page
Loading...
