Sony DSLR-A350 - Specifying DPOF

Specifying DPOF
Using the camera, you can specify the images and the number of images to
print
before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
1 MENU button --+ [B 1 --+ [OPOF setup] --+ [Marked images]
An image is displayed on the single screen.
2 Select the image with <114/~ on the controller.
3 Select the number of sheets with the ®./8.. buttons .
• To unspecify DPOF, set the number to "0."
4 Press the MENU button.
5 Select [OK] with. on the controller, then press the center of
the controller.
Noles
• You cannot specify DPOF on RAW data files.
•
You can specify any number up to 9.
• If you unspecify DPOF, the index print is also canceled.
MENU button --+ [B 1 --+ [OPOF setup] --+ [All images] or
[Cancel all] --+ [OK]
•
3
...
lQ
CD
'"
141