The
power
turns
off
suddenly.
•
If
you do not operate the camera for given period
of
time, the camera turns
to power saving mode and nearly shuts down.
To
cancel the power save,
operate the camera, such as pressing the shutter button halfway down
(page 121).
Nothing
is
displayed
on
the
LCD
monitor
in
viewfinder
mode
when
the
power
is
turned
on.
•
In
the default setting, the LCD monitor will turn
off
if
no
operation
is
registered for more than five seconds to minimize the battery consumption.
You can change the time that the LCD monitor
is
turned
off
(page 121).
• The LCD monitor
is
set to off. Press the
D1SP
button to turn the LCD
monitor on (page 39).
The
image
is
not
clear
in
the
viewfinder.
• Adjust the diopter scale properly using the diopter-adjustment dial
(page 68).
No
images
in
the
viewfinder.
• The LIVE VIEW/OVF switch
is
set to "LIVE VIEW." Set it to
"OVP'
(page 67).
The
image
has
not
been
recorded.
• A memory card
is
not inserted.
The
shutter
does
not
release.
• Check the free capacity
of
the memory card (page 29). If
it
is
full, do one
of
the following:
- Delete unnecessary images (page 110).
- Change the memory card.
• You cannot record images while charging the built-in !lash (page 79).
• The shutter cannot be released when the subject
is
out
of
focus (page 72).
• The lens
is
not attached properly. Attach the lens properly (page
19).
• When an astronomical telescope, etc.,
is
attached to the camera, set the
recording mode to M and do your shooting.
152
To Next Page
Loading...
