To
remove
the
memory
card
Check that the access lamp
is
not lit, then
open the memory card cover, push down
the memory card eject lever. After the
card is ejected a little, pull out the
memory card.
Access
lamp
• The memory card may be hot
just
after it has been used for a long time.
Be careful when you handle it.
• When the access lamp is lit, do not remove the memory card or the
battery pack, or turn off the power. The data may be corrupted.
• Data may be damaged if you place the memory card near strongly-
magnetized material or use the memory card
in
a static-prone or
electrically noisy environment.
• We recommend backing up important data, such as to a hard disk
of
a
computer.
• When you carry or store the memory card, put it in the case supplied with
it.
• Do not expose the memory card to water.
• Do not touch the terminal section
of
the memory card with your hand
or
a
metal object.
On
the
CF
card/Microdrive
• Be sure to format the
CF
card/Microdrive using this camera when you use
it for the first time.
• Do not remove the label
of
a
CF
cardIMicrodrive or attach a new label
over the label.
• Do not press on the label strongly.
Notes
on
use
of
the
Microdrive
A Microdrive
is
a compact and lightweight hard disk drive that complies with
CompactFlash
Type
II.
22
To Next Page
Loading...
