Notes
• Turn
off
the wireless flash mode after wireless flash shooting. If the built-in flash is
used while the wireless flash mode
is
still active, inaccurate flash exposures will
result.
• Change the channel
of
the external flash when another photographer is using a
wireless flash nearby and his/her built-in flash light triggers firing
of
your flash.
To
change the channel
of
the external flash, refer to the operating instructions supplied
with it.
The
AEL
button
setting
When using the wireless flash, it
is
recommended that you set [AEL button]
(page 120) to [AEL hold] in the
0 Custom menu.
82
To Next Page
Loading...
