64
Notes
• The (Camera shake warning) indicator is not indicated in manual exposure
mode.
• When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode,
the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary
(page 90).
• Set the flash mode to (Fill-flash) when you shoot with the flash (page 82).
However, the flash range differs according to the aperture value. When you shoot
with the flash, check the flash range (page 84).
3 Shoot the image after the
exposure is set.
• Check the exposure value on the EV
scale.
Toward +: Images become brighter.
Toward –: Images become darker.
The b B arrow appears if the set
exposure is beyond the range of the EV
scale. The arrow starts flashing if the
difference becomes greater.
Standard value
To Next Page
Loading...
