SI10Dling
willi
manual
exposure
mole-II
Manual
exposure
You can manually adjust the shutter speed and aperture values.
This mode is useful when you maintain the setting
of
the shutter speed and the aperture value •
or when you use
an
exposure meter.
Mode dial
-----.'~
Front control dial
Rear control dial
CD
Set the mode dial to
M.
® Select a shutter speed using the front control dial and an aperture value using the rear control
dial.
..1._
~-
Front control
dial
IQ/
50
m---=-s--=.6'-c---l
1~-3"2"1
..
ri"1"2"3+
I
~~
DlrDJl::I~11!D
~
lAWS
~90%1
RNE I
CL
IfiiI
100
-
Rear control
dial
M
1/S0(~=
1~-3"2"1"O'~'''2''3+
I
~~
DlrDJl::I~11!D
~
lAws
@)90%1
FINE
I
CL
I~
100
•
"BULB"
(Bulb shooting) is indicated next to
"30"
(page 43).
• In the manual exposure mode, even when [ISO sensitivity] (page 64)
is
set to [AUTO], it
is
fixed to ISO
200.
• You can exchange their functions
of
the front and rear control dials with [Ctrl dial setup] in the 0 Custom
menu (page 107).
• When the flash is pulled up, the flash fires regardless
of
the amount
of
ambient light (page 73).
•
The
{(_
(Camera-shake warning) indicator does not appear in the manual exposure mode.
41