10
Step 3: Charging the battery pack
You can charge the optional
“InfoLITHIUM” battery pack (L
series) with the supplied AC
Adaptor.
b Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
(p. 103).
1 Press the battery pack against the
back of your camcorder and slide
it down.
2 With the B mark on the DC plug
facing outwards, connect the DC
plug to the DC IN jack on your
camcorder.
3 Connect the power cord (mains
lead) to the AC Adaptor.
4 Connect the power cord (mains
lead) to the wall outlet (wall
socket).
5 Set the POWER switch to OFF
(CHG).
The CHG lamp lights up and charging
starts.
AC Adaptor
Power cord (mains lead)
DC plug
DC IN jack
To the wall outlet
(wall socket)
B mark
To Next Page
Loading...
Need help?
General