EasyManua.ls Logo

Sony DVP-S725D - Custom Settings (CUSTOM SETUP)

Sony DVP-S725D
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Settings and Adjustments
PICTURE
MEMORY
4
7
5
8
0
6
9
Custom Settings (CUSTOM
SETUP) Z
CUSTOM SETUP
AUTO PLAY:
DIMMER:
PAUSE MODE:
BOOKMARK RESET
PARENTAL CONTROL
PLAYBACK MEMORY:
To set, press , then .
To quit, press .
OFF
EURO AV OUT: VIDEO
COMPONENT OUT: ON
BRIGHT
AUTO
ON
ENTER
SETUP
Storing the picture in memory
During playback, when you find the scene to be
stored in memory, press PICTURE MEMORY on the
remote.
The picture is stored in memory.
Notes
The player can store in memory only one scene. The stored
picture appears in both the background and the startup screen.
When the picture is stored in memory by pressing PICTURE
MEMORY, the picture stored before is not retained in memory.
When you operate this player during storing picture in
memory, the picture does not be stored in memory.
Settings for Display (SCREEN SETUP)
Select “CUSTOM SETUP” after pressing SET UP.
“CUSTOM SETUP” allows you to set the playback
conditions.
Default settings are underlined.
pCOMPONENT OUT
Selects the methods of outputting video signals from the
COMPONENT VIDEO OUT (Y, C
B/B-Y, CR/R-Y)
connectors on the rear panel of the player.
When you select “ON,” you need to connect the monitor
or projector via EURO AV, VIDEO OUT or S VIDEO OUT
beforehand.
OFF: outputs no signals.
ON: outputs the component video signals.
Notes
When you set “EURO AV OUT” to “RGB”, you cannot set
“COMPONENT OUT” to “ON.”
When you connect the player to a monitor or projector via only
the COMPONENT VIDEO OUT connectors, do not select
“OFF.” If you select “OFF” in this case, the picture may not
appear.
pEURO AV OUT
Selects the methods of outputting video signals from the
EURO AV 1(RGB)–TV connectors on the rear panel of the
player.
VIDEO: outputs the video signals.
S VIDEO: outputs the S video signals.
RGB: outputs the RGB signals.
Notes
When you set “COMPONENT OUT” to “ON”, you cannot set
“EURO AV OUT” to “RGB.”
If your TV is not conformed to the S video or the RGB signals,
no picture appears on the TV screen even if you select “S
VIDEO” or “RGB.” Refer to the instructions supplied with
your TV.
If your TV has only one EURO AV IN connector, do not select
“S VIDEO.”
pAUTO PLAY
Selects the setting of Auto Play when you connect the AC
power cord to the AC outlet.
OFF: does not use “TIMER,” “DEMO1“ or “DEMO2” to
start playing.

Table of Contents

Other manuals for Sony DVP-S725D

Related product manuals