Chapter 11 DME Operations
120
Global Effect Operations
Crossing images from up to three consecutive channels in three
dimensions
Use the following procedure.
1
In the Combiner Priority menu, press [Depth], turning it on.
2
Set the following parameters.
Ch1+Ch2
Ch1+Ch2+Ch3
Crossing images from channels 1 and 2, and channels 3 and 4 in
three dimensions
Use the following procedure.
1
In the Combiner Priority menu, press [Combiner1 Depth], turning it on.
2
Set the following parameters.
3
Press [Combiner2 Depth], turning it on.
4
Set the following parameters.
Knob Parameter Adjustment Setting values
1 Soft Softness of edges of crossed
section
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Soft1 Softness of edges of channel 1
and channel 2 crossed section
0.00 to 100.00
2 Soft2 Softness of edges of channel 2
and channel 3 crossed section
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Soft1 Softness of edges of channel 1
and channel 2 crossed section
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Soft2 Softness of edges of channel 3
and channel 4 crossed section
0.00 to 100.00
To Next Page
Loading...
