123Global Effect Operations
Chapter 11 DME Operations
The part of the image defined by Top, Left, Right, and Bottom is magnified
or shrunk to fit into Side V or Side H.
To invert the image in a side face
For example, to invert the image on the front of Side H in the <Side H Front>
group, press the following buttons, turning them on.
Invert H: To invert horizontally.
Invert V: To invert vertically.
For the images on the other faces, use a similar operation in the following
groups:
• Back image of Side H: <Side H Back> group
• Front image of Side V: <Side V Front> group
• Back image of Side V: <Side V Back> group
Shadow Settings
This effect uses two successive channels to give an image a shadow.
For an illustration, see “Global Effects” in Chapter 1 (Volume 1).
5 Rotation Angle of rotation, when rotated
around the Z-axis of the source
space
0/90/180/270°
Knob Parameter Adjustment Setting values
Top side
Side V
Actual size, upper left corner
Set automatically
Cropped region
Crop Compress
Magnified or
shrunk to fit
Side H
To Next Page
Loading...
