135Control of VTRs and Disk Recorders
Chapter 12 External Devices
Device control block in VTR/disk recorder operation mode (trackball type)
Selecting a VTR/disk recorder
To select the VTR/disk recorder to be controlled, in the device selection
buttons of the device control block, press a selection of the [DEV1] to [DEV12]
buttons, turning them on.
Controlling the tape/disk transport
Using the buttons in the device control block, you can control the VTR tape
transport or the disk recorder disk transport.
For more details of the effect of buttons in VTR/disk recorder operation mode,
see “Device Control Block (Trackball)” and “Device Control Block
(Joystick)” in Chapter 2 (Volume 1).
Depending on the settings in setup, you can also operate the VTR or disk
recorder from the standard type transition control block.
For more details of the effect of buttons in VTR/disk recorder operation mode,
see the section “Transition Control Block (Standard Type)” in Chapter 2
(Volume 1).
For details of settings in setup, see “Setting VTR operation button assignment”
(page 256).
DEV
DEV1
DEV5
DEV9
MENU
DEV2
DEV6
DEV10
DEV3
DEV7
DEV11
REW
DEV4
STOP
DELAY
REC
DEV8
DEV12
VAR SHTL JOG
PLAY FFCUE
STB
OFF
START
TC
STOP
TC
ALL
STOP
To Next Page
Loading...
