Chapter 19 Color Corrector
402
Color Corrector Functions
2
In the <Output Process> group, press [Output Process], turning it on.
3
Adjust the following parameters.
To return the parameters to their default settings
In the <Output Process> group, press [Unity].
YUV Clip Operations
Applying YUV clip processing
Use the following procedure.
1
In the CCR menu, press VF1 ‘CCR1’ and HF7 ‘YUV Clip.’
The YUV Clip menu appears.
2
In the <YUV Clip> group, press [YUV Clip], turning it on.
3
In the <YUV Clip Adjust> group, select the target for adjustment.
Luminance: settings for the luminance signal.
Chroma: settings for the color difference signal.
4
Depending on the selection in step 3, adjust the following parameters.
• When Luminance is selected
Knob Parameter Adjustment Setting values
1 Video Gain Video signal gain –200.00 to +200.00
2 Y Gain Y signal gain –200.00 to +200.00
3 C Gain Chrominance signal gain –200.00 to +200.00
4 Hue Delay Hue delay –180.00 to +180.00
5 Black Level Black level –116.90 to +116.90
Knob Parameter Adjustment Setting values
1 White Clip White clip adjustment –6.85 to +109.13
2 Dark Clip Dark clip adjustment –6.85 to +109.13
To Next Page
Loading...
