Chapter 11 DME Operations
42
DME Special Effect Operations
The flex shadow central axis appears when the [Flex Shadow Axis] function is
enabled in the Graphic menu. For details, see “Graphics Display” (page 20).
Skewing the flex shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Skew], turning it on.
2
Adjust the following parameters.
Adding perspective to the flex shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Perspective], turning it on.
2
Adjust the following parameters.
When the default Axis Loc setting is used
Picture
Flex shadow
Axis Loc position
Shadow skewed
with Axis Loc set at
the lower left corner
of the picture
Shadow size and
perspective adjusted
with default Axis Loc
setting
Shadow skewed with
Axis Loc set at the
midpoint on the left
edge of the picture
Axis Loc H
Axis Loc V
Knob Parameter Adjustment Setting values
1 Skew H Skew horizontally –100.00 to +100.00
2 Skew V Skew vertically –100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Perspective H Add horizontal perspective –100.00 to +100.00
To Next Page
Loading...
