Appendix
446
Macro File Editing Rules
Cue Device? 1 to 12 Applicable device
Timecode? Current (a), hh:mm:ss:ff Start point timecode
hh=hours (00 to 23)
mm=minutes (00 to 59)
ss=seconds (00 to 59)
ff=frames (00 to 29)
(a): Mode in which the
currently set timecode is
used
Stop Device? 1 to 12 Applicable device
Snapshot Region? ME1 to ME3, PP, User1 to
User8, DME1 to DME8,
Router
Applicable region
Register? 1 to 99 Applicable register number
Attribute? Off, Dissolve, AutoTransiton,
Dissolve&AutoTransition
Applicable snapshot
attributes
Time? Current (a), 1 to 999 Duration of effect dissolve
(number of frames)
(a): Mode in which the
currently set value is used
KeySnapshot ME? ME1 to ME3, PP Applicable switcher bank
Key? Key1 to Key4 Applicable key
Register? 1 to 4 Applicable register number
WipeSnapshot ME? ME1 to ME3, PP Applicable switcher bank
Register? 1 to 10 Applicable register number
DMEWipeSnapshot ME? ME1 to ME3, PP Applicable switcher bank
Register? 1 to 10 Applicable register number
TimelineRecall Region? ME1 to ME3, PP, User1 to
User8, DME1 to DME8,
PBus, Device1 to Device12,
GPI
Applicable region
Register? 1 to 399 Applicable register number
TimelineRun Region? ME1 to ME3, PP, User1 to
User8, DME1 to DME8,
PBus, Device1 to Device12,
GPI, Current (a)
Applicable region
(a): Mode in which operation
takes place in the region
currently specified in the
numeric keypad control
block
TimelineRewind Region? ME1 to ME3, PP, User1 to
User8, DME1 to DME8,
PBus, Device1 to Device12,
GPI, Current (a)
Applicable region
(a): Mode in which operation
takes place in the region
currently specified in the
numeric keypad control
block
Symbol Parameter name Arguments Description
To Next Page
Loading...
