Sony ECM-HST1 User Manual

Attaching the microphone (see illustration m>
1 Ensure that the lock knob of the microphone is turned fully counterclockwise
CD (see illustration m-l).
2 Orient the arrow on the bottom of the microphone ® to the arrow on your
camcorder ® (see illustration m-l).
3 Insert the shoe connector (terminal) of the microphone into the slot @ on your
camcorder, and then slide the microphone in the direction of the arrow ®
(see illustration m-l).
4 Turn the lock knob clockwise until it clicks (see illustration m-2).
5 Point the front of the microphone toward the s~ect. The microphone can be
rotated more than 180 degrees (see illustration 1E)-3).
To detach the microphone
1 Loosen the lock knob counterclockwise.
2 Press down the microphone and slide it in the opposite direction when
attaching.
Note
If it is difficult to attach the microphone, turn the lock knob counterclockwise
until it stops. The lock will be released.
Specifications
Type
Frequency response
Pickup pattern
Operating temperature
Storage temperature
Dimensions
Mass
Included items
MS (Mid-Side) stereo system
150 - 10,000 Hz
90
0
or 120
0
,
2-ste.£..switching
(see illustration l!I)
o °C to 40°C (32 OF to 104 OF)
-10 °C to 60°C (14 OF to 140 OF)
Approx. 32 mm x 74.2 mm x 66.5 mm
(15/16 x 3 x 2 5/8 inches) (excluding projecting
parts)
Approx. 47 g (1.7 oz)
Stereo microphone (1), Wind screen (1), Carrying
pouch (1), Set of printed documentation
Design and specifications are subject to change without notice.
• Active
n Interface Shoe
This mark indicates the Active Interface Shoe System for use with Sony
video products. Video components and accessories equipped with this
system are designed to make effective recording simple.

Sony ECM-HST1 Specifications

General

Weight	50 g
Dimensions (WxDxH)	27 x 60.5 x 72.5 mm