2
US
Beep
You can set the audible notification of operations to ON/OFF.
To make the setting, select [SETUP] first.
1 Press the NEXT button to display [SETUP], then press the ENTER button.
2 Press the NEXT button to display [BEEP] (Beep), then press the ENTER
button.
3 Press the NEXT button to select the setting, then press the ENTER
button.
All operation sounds are enabled.
Operation sounds are emitted for the following operations only.
•Power turned on
• Recording started
• Recording stopped
• Shutter pressed
• A disabled operation was selected or an error occurred
All operation sounds are disabled.
Returns to the [BEEP] menu.
t
Setting
display
To Next Page
