Help Guide
Portable Theatre System
HT-AX7
Using the Voice Assist Function (Siri)
By using the Siri function that comes with the iPhone, you can speak to the front speaker’s microphone to operate the
iPhone.
The following shows how to use Siri.
Note
For Apple iOS devices, the speaker system is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on
the devices with iOS 9.x or earlier.
Siri cannot be activated when you say “Hey Siri” through the front speaker’s microphone even when the iPhone’s [Listen for “Hey
Siri”] setting is on.
Related Topic
Pairing with BLUETOOTH Devices
5-048-914-11(1) Copyright 2023 Sony Corporation
Turn on Siri.
On the iPhone, select [Settings] - [Siri & Search] and enable [Listen for “Hey Siri”].
The above operation is an example. For details, refer to the operating instructions supplied with the iPhone.
For details on Siri, refer to the operating instructions or support website of the iPhone.
1
Connect the speaker system to the iPhone via BLUETOOTH connection.
2
While the speaker system is connected with the iPhone via BLUETOOTH connection and the iPhone is in
standby or playing music, press and hold
(call)/ (play) on the front speaker for about 2 seconds.
The Siri is activated and you will hear the start-up sound.
3
Make a request to Siri through the front speaker’s microphone.
For details on Siri, such as apps which work with Siri, refer to the operating instructions supplied with the iPhone.
4
To Next Page
Loading...
