Sony ICP-3000 - Page 410

USO RESTRITO
410
Menus of Disabled Operations and Settings
Menu
Disabled operation/setting
Number
Path
6342 to
6347
Snapshot >DME Snapshot
M/E-2 region selection and settings
6351 to
6357
Snapshot >Key Snapshot
M/E-1 Key5 to 8, M/E-2 Key1 to 8, P/P Key5 to 8 selection and settings
6411.1
Shotbox >Register >Store/Recall
>Edit
M/E-2, DME1, DME2 region settings
7121
File >Effect >Effect 1-99
M/E-2, DME1, DME2 region selection
7121.1
File >Effect >Effect 1-99 >File Edit
M/E-2, DME1, DME2 region selection
7122
File >Effect >User DME Wipe Effect
101-199
All menu operations
7122.1
File >Effect >User DME Wipe Effect
101-199 >File Edit
All menu operations
7123
File >Effect >User DME Wipe Effect
201-299
All menu operations
7123.1
File >Effect >User DME Wipe Effect
201-299 >File Edit
All menu operations
7131
File >Snapshot >Snapshot
M/E-2, DME1, DME2 region selection
7131.1
File >Snapshot >Snapshot >File Edit
M/E-2, DME1, DME2 region selection
7132
File >Snapshot >Wipe Snapshot
M/E-2 region selection
7132.1
File >Snapshot >Wipe Snapshot
>File Edit
M/E-2 region selection
7133
File >Snapshot >DME Snapshot
M/E-2 region selection
7133.1
File >Snapshot >DME Snapshot >File
Edit
M/E-2 region selection
7134
File >Snapshot >Key Snapshot
• M/E-2 region selection
• P/P Key5 to 8 selection
7134.1
File >Snapshot >Key Snapshot >File
Edit
• M/E-2 region selection
• P/P Key5 to 8 selection
7313.2
Engineering Setup >System >Format
>Aspect >Switcher Aspect
M/E-2 settings
7321
Engineering Setup >Panel >Config
[M/E2] selection
7321.2
Engineering Setup >Panel >Config
>Key Trans Link
• M/E-2 settings
• P/P DSK5 to 8 settings
• [Key5] to [Key8] selection
7321.3
Engineering Setup >Panel >Config
>External Bus Link
• Selection of items related to M/E-2
• Selection of items related to Key5 to 8
7321.6
Engineering Setup >Panel >Config
>External Bus Link >Link Bus Adjust
• Selection of items related to M/E-2
• Selection of items related to Key5 to 8
7321.7
Engineering Setup >Panel >Config
>Region Button Assign
M/E-2, DME1, DME2 selection
7321.9
Engineering Setup >Panel >Config
>Transition Module
• KEY5 to KEY8, KEY1/5 to KEY4/8 selection
• ADD, SHIFT selection
7321.18
Engineering Setup >Panel >Config
>Util Bus/Key Inhibit
• M/E-2 settings
• [Key5] to [Key8] selection
7321.19
Engineering Setup >Panel >Config
>Menu Panel
M/E-2 selection
7321.27
Engineering Setup >Panel >Config
>TB Module DME Ch Inhibit
DME1 or DME2 settings
7322
Engineering Setup >Panel >Xpt
Assign
Setting of items related to M/E-2, DME1, DME2
Appendix