Control of VTRs, Extended VTRs, and Disk Recorders
Chapter
11
External
Devices
Sorting files in the list
Select [File Name], [File No], or [Update] in the <Sort>
group after step 2 above.
File Name: Sorts in alphabetical order of file name.
File No: Sorts in ascending file number order.
Update: Sorts in file update date order, newest first.
When the loaded file is not a target for recording
1
Open the Device >DDR/VTR >File List menu (5333).
2
Press [Unload].
Notes
•
Files cannot be sorted by the file update date and time
when using the video disk communications protocol.
•
When using an Extended VTR, it is not possible to sort
files.
Loading Files
Notes
Files cannot be recalled when the disk recorder is set to
Recorder.
1
Open the Device >DDR/VTR >File List menu (5333).
2
Select the device.
3
Select the file you want to recall.
4
Press [Load].
Creating new files
A file name must be specified to record to a new file on a
disk recorder.
Notes
•
New files cannot be created when the disk recorder is set
to Player or Recorder/Player.
•
In the case of Extended VTRs, new files cannot be
created.
1
Open the Device >DDR/VTR >File List menu (5333).
2
Press [New File].
3
Enter a file name and press [Enter].
When using the Sony disk 9-pin protocol: Up to 23
characters.
When using the video disk communications
protocol: Up to 8 characters (in Fixed 8 Character
mode) or 23 characters (in Variable Length mode)
For details about the file name character count mode
in the video disk communications protocol,
1
“Making Detailed Settings on the External Device
Connected to the Serial Port” (p. 369).
To Next Page
Loading...
