[89] Shooting Selecting a shooting mode
Movie/S&Q Motion
You can select the exposure mode for movie shooting or slow-motion/quick-motion shooting.
You can change the setting and playback speed for slow-motion/quick-motion shooting with [
S&Q Settings].
Menu item details
Program Auto / Program Auto:
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the
aperture value).
Aperture Priority / Aperture Priority:
Allows you to shoot after adjusting the aperture value manually.
Shutter Priority / Shutter Priority:
Allows you to shoot after adjusting the shutter speed manually.
Manual Exposure / Manual Exposure:
Allows you to shoot after adjusting the exposure (both the shutter speed and the aperture value)
manually.
Note
When you operate the front multi-controller while recording a movie or a slow-motion/quick-motion
movie, set the front multi-controller click switch to “OFF.” If you operate the front multi-controller while
shooting a movie or a slow-motion/quick-motion movie with the front multi-controller click switch set
to “ON,” the sound of the front multi-controller will be recorded.
When the shooting mode is set to
(Movie/S&Q Motion), [AF System] is fixed to [Ddc Phase AF
Only]. The number of focus points is limited to 61.
Turn the mode dial to (Movie/S&Q Motion).
1
MENU →
(Camera Settings2) → [Movie/S&Q Motion] → desired setting.
2
Press the MOVIE (movie) button to start recording.
Press the MOVIE (movie) button again to stop recording.
3
To Next Page
Loading...
