Sony ILCA-99M2 - Page 216

On:
Displays the shooting information on the TV.
The recorded image and the shooting information are displayed on the TV, while nothing is
displayed on the camera’s monitor.
Off:
Does not display the shooting information on the TV.
Only the recorded image is displayed on the TV, while the recorded image and the shooting
information are displayed on the camera’s monitor.
Note
When this product is connected to a 4K-compatible TV, [Off] is selected automatically.
[215] Customizing the camera Camera settings
HDMI Settings: TC Output (movie)
Sets whether or not to layer the TC (time code) information on the output signal via the HDMI
terminal when outputting the signal to other professional-use devices.
This function layers the time code information on the HDMI output signal. The product sends the
time code information as digital data, not as an image displayed on the screen. The connected
device can then refer to the digital data to recognize the time data.
Menu item details
On:
Time code is output to other devices.
Off:
Time code is not output to other devices.
Note
When [ TC Output] is set to [On], the image may not be output properly to the TV or recording
device. In such cases, set [
TC Output] to [Off].
[216] Customizing the camera Camera settings
MENU →
(Setup) → [HDMI Settings] → [ TC Output] → desired setting.
1