Sony ILCA-99M2 - Setting Reset [229]

Demo Mode
The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time. Normally select
[Off].
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for about
one minute. Only protected AVCHD movies can be played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded date
and time.
Off:
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC-PW10AM AC Adaptor (sold
separately).
Even if [On] is selected, the product does not start a demonstration if there is no movie file on the
memory card.
When [On] is selected, the product does not switch to power save mode.
[Demo Mode] always displays movies on the memory card in memory card slot 1.
[229] Customizing the camera Initializing the camera
Setting Reset
Resets the product to the default settings. Even if you perform [Setting Reset], the recorded
images are retained.
Menu item details
Camera Settings Reset:
Initializes the main shooting settings to the default settings.
Initialize:
MENU →
(Setup) → [Demo Mode] → desired setting.
1
MENU →
(Setup) → [Setting Reset] → desired setting.
1