You can set the self-timer in bracket shooting mode, and the shooting order for exposure
bracketing and white balance bracketing.
Menu item details
Selftimer during Brkt:
Sets whether to use the self-timer during bracket shooting. Also sets the number of seconds
until the shutter is released if using the self-timer.
(OFF/2 Sec/5 Sec/10 Sec)
Bracket order:
Sets the order of exposure bracketing and white balance bracketing.
(0→-→+/-→0→+)
[279] List of MENU items
Camera Settings1
Recall (Camera Settings1/Camera Settings2)
Allows you to shoot an image after recalling often-used modes or camera settings registered
with [
/ Memory] in advance.
Hint
To recall settings registered to the memory card, set the mode dial to 1, 2 or 3, then select the
desired number by pressing the left/right side of the multi-selector.
/ (Drive Mode) button → select bracket shooting mode.
You can also set the drive mode by selecting MENU →
(Camera Settings1) →
[Drive Mode].
1
MENU →
(Camera Settings1) → [Bracket Settings] → desired setting.
2
Set the mode dial to 1, 2, or 3 (Memory recall).
1
Press the center of the multi-selector to confirm.
You can also recall registered modes or settings by selecting MENU →
(Camera
Settings1) → [
/ Recall].
2
To Next Page
Loading...
