Menu item details
Auto:
Uses both the focal plane phase detection AF sensor and the dedicated phase detection AF
sensor depending on the lens or the shooting mode.
Ddc Phase AF Only:
Always uses only the dedicated phase detection AF sensor.
Note
When the shooting mode is set to (Movie/S&Q Motion), [AF System] is locked to [Ddc Phase AF
Only].
[287] List of MENU items Camera Settings1
Flexible Spot Points
When [Focus Area] is set to [Flexible Spot] or [Expand Flexible Spot], and you want to select a
focus area quickly, you can limit the available number of focus points.
Menu item details
All:
Selects from 323 focus points at maximum.
63 Points:
Uses the limited 63 focus points out of 323. Available only when the lens that supports the
Hybrid Phase Detection AF is attached, and [AF System] is set to [Auto].
MENU →
(Camera Settings1) → [Flexible Spot Points] → desired setting.
1
To Next Page
Loading...
