To use the self-timer in bracket mode, select bracket mode under drive mode, then select MENU →
(Camera Settings1) → [Bracket Settings] → [Selftimer during Brkt].
Note
The self-timer is unavailable in the following situations:
The shooting mode is set to [Sweep Panorama].
[64] Shooting Selecting a drive mode (Continuous shooting/Self-timer)
Self-timer(Cont)
Shoots a designated number of images using the self-timer after a designated number of
seconds have elapsed since the shutter button was pressed. You can choose the best from
multiple shots.
Menu item details
For example, three images are shot when 10 seconds have elapsed after the shutter button is
pressed when [Self-timer(Cont.): 10 Sec. 3 Img.] is selected.
Self-timer(Cont.): 10 Sec. 3 Img.
Self-timer(Cont.): 10 Sec. 5 Img.
Self-timer(Cont.): 5 Sec. 3 Img.
Self-timer(Cont.): 5 Sec. 5 Img.
Self-timer(Cont.): 2 Sec. 3 Img.
/ (Drive Mode) button → [Self-timer(Cont)].
You can also set the drive mode by selecting MENU→
(Camera Settings1) →
[Drive Mode].
1
Select the desired mode by pressing the multi-selector right/left.
2
Adjust the focus and shoot the image.
The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated
number of seconds have elapsed. The designated number of pictures are taken
continuously.
3
To Next Page
Loading...
