II-7
Overview
Chapter
Chapter 2 Video Switching
s
Video Switching
Overview
This unit includes three video composition blocks: M/E (Mix/Effect), Aux1, and Aux2. You can also apply transitions
between the buses of each block.
In the M/E block, you can add a variety of video effects while switching the video, as well as use keys to compose video.
Although you cannot add wipe and key effects in the Aux blocks, video can be switched via mixing in these blocks. (See
“AUX Mixing” (page II-9))
Transition, effect, and key adjustments and settings are
performed in the following menus.
Video input Video output
Preview
Program
Aux1 Preview
Aux1 Program
Aux2 Preview
Aux2 Program
Aux1 PGM Bus
Aux1 PST Bus
Aux2 PGM Bus
Aux2 PST Bus
Key Source Bus
Key Fill Bus
PST Bus
PGM Bus
Aux1
Aux2
M/E
(Mix/Effect)
Menu Description Reference
page
Misc Set general transition settings
(e.g., transition rates, color
backgrounds).
II-8
Effect Set the transition type. II-8
Set the wipe. II-10
Set the DME wipe. II-12
Key Set the key. II-19
To Next Page
Loading...
