Sony MDR-E9LP Specifications

Specications
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony and the Sony logo are trademarks of Sony. Features
and specications are subject to change without notice. Non-metric weights and
measures are approximate and may vary. /Updated: December 21, 2011
Audio
Driver Unit
13.5 mm, dome type (CCAW)
Frequency Response
18 - 22,000 Hz
Impedance
16 ohms at 1 kHz
Sensitivity (db)
104 dB/mW
General
Design
Earbud
Headband
None
Magnet
High-energy Neodymium (300 kJ/m³)
Plug
Nickel-plated, L-shaped stereo mini plug
Type of Use
Portable
Hardware
Cord
47 1/4 in. (1.2 m), Litz cord Y-Type
Power
Power Handling Capacity
100 mW (IEC)
Speaker
Type
Open-air, dynamic
Weights and Measurements
Cord Length (Approx.)
47 1/4 in. (1.2 m)
Weight (Approx.)
22 oz. (6 g) without cord
Accessories
Supplied Accessories
Earpads (2)
Operating Instructions (1)
Warranty Card (1)
MDR-E9LP/BLK
Earbud Headphones - Fashion Earbuds

Sony MDR-E9LP Specifications

Driver Specifications

driver unit size	13.5 mm
driver type	dome type
impedance	16 Ω at 1 kHz

Audio Specifications

power handling capacity	100 mW
sensitivity	104 dB/mW
frequency response	18 – 22, 000 Hz

Physical Characteristics

cord length	Approx. 1.2 m
plug type	L-shaped stereo mini plug
mass without cord	Approx. 6 g