Sony MDR-EX210B/BLU User Manual

Sound Story
13.5mm driver units provide rich and dynamic audio reproduction with solid bass performance.
High Energy Neodymium Drivers
Ecient Neodymium drivers reproduce clear mid-range and low-end sound.
Vertical, in-the-ear design
Get close to your music with the vertical, in-the-ear design of the MDR-EX210B. Optimized to sit
comfortably and securely in your ear, the benets are better sound isolation and long-term t.
Secure t
3 sizes of supplied hybrid silicone earbuds equate to a ne-tuned the t and enhanced music
enjoyment.
Specications
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony is a trademark of Sony. All other trademarks are
trademarks of their respective owners. Features and specications are subject to change
without notice. /Updated: March 1, 2012
Audio
Driver Unit
13.5 mm diameter, dome type (CCAW adopted)
Frequency Response
5-24,000 Hz
Impedance
16 ohms at 1 kHz
Sensitivity (db)
105 dB/mW
General
Case Type
Nylon case with slide out tray to hold headphones
Magnet
Neodymium (440kJ/m
3
) for outstanding bass performace in a small driver
Plug
L shaped stereo mini plug (Gold)
Power
Power Handling Capacity
100 mW (IEC)
Speaker
Type
Closed, Dynamic
Weights and Measurements
Cord Length (Approx.)
OFC neckchain, 47.24 inches (1.2m)
MDR-EX210B/BLU

Sony MDR-EX210B/BLU Specifications

General

Type	In-ear
Driver Unit	9 mm
Sensitivity	100dB/mW
Cable Length	1.2 m
Connector	3.5 mm
Plug	Gold-plated L-shaped stereo mini plug
Color	Blue
Power Handling Capacity	100 mW
Impedance	16 ohms
Cable	OFC

Summary

Sound Story

High Energy Neodymium Drivers

Efficient Neodymium drivers reproduce clear mid-range and low-end sound.

Vertical In-Ear Design

Optimized for a comfortable and secure fit, offering better sound isolation and long-term wear.

Secure Fit

Features 3 sizes of hybrid silicone earbuds for a fine-tuned fit and enhanced music enjoyment.

Product Specifications

Audio Specifications

Details driver unit, frequency response, impedance, and sensitivity for audio performance.

General Features

Covers case type, magnet material, and plug type for overall usability.

Power Handling

Specifies the power handling capacity of the device.

Speaker Type

Indicates the speaker design as Closed, Dynamic.

Measurements

Provides approximate cord length measurement.