EasyManuals Logo

Sony MDR-EX32LP User Manual

Sony MDR-EX32LP
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
Features
Earbud-style headphones deliver a rich, powerful sound with deep bass.
Robust sound achieved by use of high-power neodymium magnets.
Wearing the headphones
Wear the earpiece marked R in your right ear and the one marked L in your left ear.
How to use the holder
Store the housing part as in illustration A. It prevents the cord from becoming tangled if
you store the ear receiver connected to a device such as WALKMAN®* in your pouch or
bag. When using the headphones, you can adjust the cord length by winding the cord
around the holder, as in illustration B.
*“WA LKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation.
How to install the earbuds correctly (see fig. C)
If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy
better sound quality, change the earbuds to another size, or adjust the earbuds position to
sit on your ears comfortably and fit your ears snugly. The M size earbuds are attached to
the headphones before shipment. If you feel the M size earbuds do not suit your ears,
replace them with the supplied S or L size earbuds. When you change the earbuds, install
them firmly on the headphones to prevent the earbud from detaching and remaining in
your ear.
Cleaning the earbuds
Remove the earbuds from the headphones, and wash them with a mild detergent solution.
Specifications
Type: Closed, dynamic
Driver units: 9 mm, dome type (CCAW)
Power handling capacity: 100 mW (IEC*)
Impedance: 16 at 1 kHz
Sensitivity: 100 dB/mW
Frequency response: 6 – 23,000 Hz
Cord: Approx. 1.22 m (48
1
/
8
in.), OFC litz cord
Plug: Gold-plated L-shaped stereo mini plug
Mass: Approx. 6 g (0.21 oz.) without cord
Supplied accessories
Earbuds (S × 2, M × 2, L × 2)
Holder (1)
*IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
Precautions
Please keep your headphones clean at all times especially inside the rubber earbud (see
fig. D).
If any dust or ear wax inside the earbud, you may experience some listening
difficulties.
Listening with headphones at high volume may affect your hearing. For traffic safety,
do not use while driving or cycling.
Do not put weight or pressure on the headphones as it may cause the headphones to
deform during long storage.
•The earbuds may deteriorate due to long-term storage or use.
Install the earbuds firmly onto the headphones. If an earbud accidentally detaches and
is left in your ear, it may cause injury.
There is EP-EX1 available (sold separately) as an optional replacement earbuds.
MDR-EX32
© 2007 Sony Corporation Printed in Thailand
Operating Instructions
Manual de instrucciones
3-291-379-11(1)
A B
C
Stereo Headphones
RL
D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MDR-EX32LP and is the answer not in the manual?

Sony MDR-EX32LP Specifications

General IconGeneral
TypeIn-ear
Driver Unit9 mm
Frequency Response8-22, 000Hz
Sensitivity100dB/mW
Cable Length1.2 m
CordY-type
Impedance16 ohms
Plug3.5 mm
WeightApprox. 3 g

Related product manuals