Sony MDR-EX40LP/VLT User Manual

Super-light in-the-ear design
High quality 9 mm driver units
Neodymium magnet for superior audio
Open air, dynamic
Specications
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony and the Sony logo are trademarks of Sony. Features
and specications are subject to change without notice. Non-metric weights and
measures are approximate and may vary. /Updated: March 8, 2012
Audio
Driver Unit
9 mm, dome type (CCAW)
Frequency Response
6 - 23,000 Hz
Impedance
16 ohms at 1kHz
Sensitivity (db)
100 dB/mW
Audio Features
Ear Cups
N/A
General
Case Type
N/A
Design
In-the-ear
Headband
N/A
Magnet
High-energy Neodymium (400 kJ/m³)
Plug
Gold-plated L-type stereo mini plug
Type of Use
Portable
Hardware
Cord
47 1/4 in. (1.2 m), Litz cord Y-Type
Power
Power Handling Capacity
100 mW (IEC)
Speaker
Type
Closed, dynamic
Weights and Measurements
Cord Length (Approx.)
47 1/4 in. (1.2 m)
Weight (Approx.)
11 oz. (3 g) without cord
Accessories
Supplied Accessories
Earbuds - SS (2), S (2), M (2)
Operating Instructions (1)
Warranty Card (1)
MDR-EX40LP/VLT

Sony MDR-EX40LP/VLT Specifications

General

Brand	Sony
Model	MDR-EX40LP/VLT
Category	Headphone
Language	English

Summary

Sony MDR-EX40LP/VLT Product Specifications

Audio Specifications

Details on driver unit, frequency response, impedance, and sensitivity.

Audio Features

Information regarding ear cup design and features.

General Specifications

Covers case type, design, headband, magnet, plug, and type of use.

Hardware Details

Specifies the type of cord used in the hardware.

Power Specifications

Details on power handling capacity.

Speaker Type

Defines the type of speaker used.

Weights and Measurements

Provides cord length and approximate weight information.

Included Accessories

Lists the supplied accessories such as earbuds, instructions, and warranty card.