Wireless Stereo Headset
MDR-XB70BT
Pairing and connecting with an Android smartphone
Pairing is the process required to create a link between BLUETOOTH devices to allow
wireless connection.
You must pair a device with the headset to be able to make a BLUETOOTH connection for
the first time.
Before you start pairing operation, make sure that:
The smartphone is placed within 1 m(3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the smartphone is on hand.
Enter pairing mode on this headset.
When you pair the headset with a device for the first time after you bought it, or after
you initialized the headset (the headset has no pairing information), press and hold the
button for about 2 seconds when the headset is turned off. The headset enters
pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for
other devices), press and hold the button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the
button. You hear voice guidance “BLUETOOTH pairing”.
1
Help Guide | Pairing and connecting with an Android smartphone https://helpguide.sony.net/mdr/xb70bt/v1/en/contents/TP0001176134.html
1 of 3 3/28/2019, 10:10 AM
To Next Page
Need help?
General
Weight and Dimensions
