Sony MHC-GT5D - Setting the Automatic Standby Function; Updating the Software

67
GB
MHC-GT5D.GB.4-570-734-11(1)
Other Operations
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1 Press OPTIONS.
2 Press / repeatedly to select
“AUTO STBY,” then press .
3 Press / repeatedly to select
“ON” or “OFF,” then press .
To exit the options menu, press
OPTIONS.
Notes
••
“AUTO STBY” flashes on the display
about 2 minutes before entering
standby mode.
••
The automatic standby function does
not work in the following cases:
— during tuner function.
— when the timer is activated.
— when microphone is connected.
Updating the software
The software of this system may
be updated in the future. You can
update the software from the
websites below.
For customers in Latin America:
<http://esupport.sony.com/LA>
For customers in Europe and
Russia:
<http://www.sony.eu/support>
For customers in other countries/
regions:
<http://www.sony-asia.com/
support>
Follow the online instructions to
update the software.