Tousethe remote
Slide and remove the battery compartment lid
_, aud insert the two supplied R6 (size AA)
batteries, • side first, matching the polarities
shown below.
Notes
• With nornlal use. the batteries should last lbr about six
HlOlllhs.
• Do not mix an old baucry wilh a ne'er one or mix
difl?rent types of ballcries.
• If you do not use the rcmole 1br a long period of time,
remove the ballcries to avoid damage fiom baltcl T
leakage and corrosion.
Setting the clock
1 Press I/_ (power) IT] to turn on the
system.
2
3
4
Press CLOCK/TIMER SET [_].
Ifthe current mode appears on the display,
press _/i_t_t [] repeatedly to select
"CLOCKSET" and then press ENTER [_.
Press 1_141/1_1_111_repeatedly
to set the hour, and then press
ENTER _].
Use the same procedure to set the
minutes.
When you turn off the system alter setting
the clock, the clock display appears instead
of the demonstration display.
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.
10GB
To Next Page
Loading...
