Creatingyour own CD
program
(Program Play)
Use buttons on Ihe remote to create your own
program.
1 Press CD _ to select the CD
function,
2
3
Press PLAY MODE _ repeatedly
until "PGM" appears while the
player is stopped.
Press DISC SKIP [] repeatedly to
select a disc,
4
Press 1441/1_1_1[] repeatedly until
the desired track number appears,
When programming MP3 files, press _3
+_ [] repeatedly to select the desired
folder, and then select the desired file.
Disc tray number Selectedtrack or file number
Total playing time of program
(including selected track or file)
5 Press ENTER [] to add the track
or file to the program.
• " appears when the total progr:un
time exceeds 100 minutes for a CD, or
when you select an MP3 file.
6 Repeat steps 3 through 5 to
program additional tracks or files,
up to a total of 25 tracks or files.
7 To play your program of tracks or
files, press I)_ [].
The program remains available unfil
you open the disc tray. To play the same
program again, press IJ_ [].
Tocancel ProgramPlay
Press PLAY MODE [] repeatedly until
"PGM" disappears while the player is stopped.
Todeletethe last track or file of the
program
Press ('LEAR [_ while the player is stopped.
Toviewthe programinformation,such
astotal playingtime andthe numberof
tracks
Press DISPLAY [] repeatedly while tile player
is stopped.
16GB
To Next Page
Loading...
