Sony MHC-RV22 - (MHC-RV555;RV55 Only) Recording on a Connected Component

36
GB
Making an analog recording
from a VIDEO CD to a video
tape
1 Connect the optional audio cords from
the VIDEO/SAT OUT L/R jacks and the
supplied video cable from the VIDEO
OUT jack to your VCR.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Making an analog recording
on a connected component
1 Connect the optional audio cords.
See “Hooking up optional components” on
page 34.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Recording on a connected
component
(MHC-RV555/RV55 only)