Tape – Play
21
GB
Use buttons on the unit for the operation.
1 Press TAPE A/B repeatedly to select
deck A or B.
2 Press PUSH Z.
3 Load a recorded/recordable tape in
deck A or B with the side you want to
play/record facing forward.
You can use TYPE I (normal) tape.
For MHC-RV555/RV55
1 Load a tape.
2 Press PLAY MODE repeatedly to select
“g” to play one side. Select “j”
1)
to
play both sides.
To play both decks in succession, press
PLAY MODE repeatedly until “RELAY”
(Relay Play)
2)
appears in the display.
3 Press N (or hH on the unit).
The tape starts playing. Press the button
again to play the reverse side.
1)
The tape deck stops automatically after repeating
the sequence five times.
2)
Relay Play always follows this cyclic sequence up
to five times, then stops:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
For MHC-RV222/RV22
1 Load a tape.
To play both decks in succession, press
PLAY MODE repeatedly until “RELAY”
(Relay Play)* appears in the display.
2 Press N.
The tape starts playing.
* After the playback of the front side of deck A, deck
B plays the front side, then stops.
Tape – Play
Loading a tape
With the side
you want to
play/record
facing
forward.
Playing a tape
continued
To Next Page
Loading...