40
GB
One of the following messages may appear or
flash in the display during operation.
VIDEO CD/CD/MP3
NO DISC
There is no disc in the player or you have loaded a
disc that cannot be played on this system (such as
DVD).
NOT IN USE
You pressed an invalid button.
OVER
You have reached the end of the disc or the end of
MP3 audio track while pressing M during
playback or pause.
PUSH STOP
You pressed PLAY MODE or SPECIAL MENU
during playback.
READING
The system is reading TOC information of the disc.
Some buttons are not available.
STEP FULL
You tried to program 26 or more tracks (steps).
Tape
NO TAB
You cannot record the tape because the tab has been
removed from the cassette.
NO TAPE
There is no tape in the tape deck.
Messages
To Next Page
Loading...