Sony MHC-RV555 - Playing repeatedly; Creating your own program

VIDEO CD/CD/MP3 – Play
15
GB
You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT until “REP” or “REP1”
appears.
REP: For all the tracks on the disc(s) up to five
times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP1” disappear.
Notes
• You cannot select “REP” and “ALL DISCS SHUF”
at the same time.
• When you select “REP1”, that track is repeated
endlessly until “REP1” is canceled.
• You cannot select “REP1” during playback of
VIDEO CDs with PBC functions (Ver. 2.0).
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 22).
1 Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2 Press PLAY MODE repeatedly in stop
mode until “PGM” appears.
3 Press DISC SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
4 Press . or > repeatedly (or turn
l L on the unit) until the desired
track number appears.
When programming the MP3 audio tracks,
press ALBUM + or – to select album, then
press . or > repeatedly (or turn l
L on the unit) until the desired track
number appears.
5 Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
Playing repeatedly
— Repeat Play
Creating your own
program
—Program Play
Selected track numberDisc tray number
Total playing time (including
selected track)
continued