Optional Components
59
GB
1 Connect audio cords.
See “Hooking up optional components” on
page 56.
2 Start recording manually.
See “Recording on a tape manually” on
page 42.
Making an analog recording
1 Connect audio cords.
See “Hooking up optional components” on
page 56.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Making an analog recording
from a VIDEO CD to a video
tape
1 Connect optional audio cords from the
VIDEO/SAT OUT L/R (audio) jacks and
the supplied video cable from the
VIDEO OUT jack to your VCR.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Note
If you connect a video deck between this system and
the TV, you may experience video leakage when
watching the video signal from this system. Do not
connect a video deck between this system and the TV.
Recording audio from a
connected component
Recording on a connected
component
To Next Page
Loading...