Tape
47
GB
Playing a tape
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press DIRECTION repeatedly to select
g to play one side. Select j*
1
to
play both sides.
To play both decks in succession, select
“RELAY” (Relay Play)*
2
.
3 Press hH (or nN on the remote).
Press hH (or nN on the remote)
again to play the reverse side.
Playback starts.
Tape presence indicator
*
1
The deck stops automatically after repeating the
sequence five times.
*
2
Relay Play always follows this cyclic sequence up
to five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse side)
With the side
you want to
play/record
facing forward.
Tape
Loading a tape
1 Press TAPE A/B repeatedly to select
deck A or B.
2 Press Z PUSH.
3 Insert a tape in deck A or B with the
side you want to play/record facing
forward.
Press Z PUSH.
Searching for the beginning of the
current or the next track (AMS)*
To go forward
Press > during playback when N lights in
the display.
“TAPE A (or TAPE B) >>> +1” appears.
Press . during playback when n lights in
the display.
“TAPE A (or TAPE B) <<< +1” appears.
To go back
Press . during playback when N lights in
the display.
“TAPE A (or TAPE B) <<< –1” appears.
Press > during playback when n lights in
the display.
“TAPE A (or TAPE B) >>> –1” appears.
* AMS (Automatic Music Sensor)
Tip
When a tape is inserted, corresponding forward/
reverse indicators light.
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Stop play Press x.
Pause Press X. Press again to
resume play.
Fast-forward or rewind Press M or m.
Remove the cassette
Other Operations
To Do this
To Next Page
Loading...