Sony MHC-RV900D - Recording from Connected Components

Optional Components
63
GB
Recording on a connected
component
Making a digital recording on
an MD
1 Connect an optical cable.
See “Hooking up optional components” on
page 61.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Making an analog recording
1 Connect the audio cords.
See “Hooking up optional components” on
page 61.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Making an analog recording
from a VIDEO CD to a video
tape
1 Connect optional audio cords from the
MD/VIDEO (AUDIO) OUT jacks and the
supplied video cable from the VIDEO
OUT jack to your VCR.
2 Start recording.
Refer to the operating instructions provided
with the connected component.
Note
You cannot record from a VIDEO CD to an MD
digitally. When you record from a VIDEO CD to an
MD, make an analog recording on MD.
Recording audio from a
connected component
1 Connect audio cords.
See “Hooking up optional components” on
page 61.
2 Start recording manually.
See “Recording from a disc/tape/radio
manually” on page 48.