Getting Started
9
GB
1 Connect the front speakers.
Connect the right and left speaker cords to
the FRONT SPEAKER jacks as shown
below.
2 Connect the surround speakers.
(MHC-RV990D only)
Connect the speaker cords to the
SURROUND SPEAKER jacks as shown
below.
3 Connect the center speaker.
(MHC-RV990D only)
Connect the speaker cords to the CENTER
SPEAKER jacks as shown below.
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
5 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so that you
can view the pictures from this system.
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
If you connect a video deck between this system and the
TV, you may experience video leakage when watching
the video signal from this system. Do not connect a
video deck between this system and the TV.
–
+
Black/Stripe (#)
Gray/Solid
(3)
Insert only the stripped portion
+
R
L
Gray/Solid
(3)
Insert only the stripped portion
Black/Stripe (#)
+
R
L
Gray/Solid
(3)
Insert only the stripped portion
Black/Stripe (#)
AM
FM
75
COAXIAL
Extend the FM lead antenna
horizontally
AM loop antenna
VIDEO
OUT
S VIDEO
OUT
TV
Video deck System
Do not connect
directly.
continued
To Next Page
Loading...