41
To timer-record, you must preset the radio
station (see “Step 3: Presetting radio
stations”) and set the clock (see “Step 2:
Setting the time”) beforehand.
6
3,4,52
TIMER SELECT
1 Tune in the preset radio station (see
“Listening to the radio”).
2 Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
7
To check the setting
Press TIMER SELECT and turn the jog dial to
select the respective mode (DAILY 1 or
DAILY 2), then press ENTER/NEXT. To
change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select “OFF”, then press ENTER/NEXT.
Tip
The power turns on 15 minutes before the preset
time.
Note
When setting the wake-up timer, set the equalizer
display to anything other than Spectrum analyzer
pattern 3 (See “To change the equalizer display” on
page 31).
Timer-recording radio
programmes
continued
To Next Page
Loading...
