Sony MHC-V77DW - Guide to Parts and Controls

MHC-V77DW
13
2-5. TOP PANEL SECTION
2 Remove the
panel, top section
in the direction
of the arrow.
3 filament tape
0 panel, top section
1 two screws
(flathead (TP))
4 dual-band dipole
antenna connector
5 wire (flat type)
(29 core) (CN3902)
9 CN1009 (8P)
7 cushion, seal
8 clamp, sleeve ferrite
front side
MIC board
pin, lead
CDM section
Note 2: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector connector
Note 1: When installing the wire (flat type), ensure that
the colored line is not slanted after insertion.
colored line
colored line
Insert is straight to the interior. Insert is incline
wire (flat type) wire (flat type)
connectorconnector
OK
NG
OK NG NG
:LUHVHWWLQJ
6 wire (flat type)
(7 core) (CN6203)
$(38.580<$86