Sony MHC-V77DW - CDM Section; Cdm90-Dvbu204;;M

MHC-V77DW
15
2-7. CDM SECTION
2-8. CDM90-DVBU204//M
1 two screws
(+BVTP 3 u 8)
2 one screw
(+BVTP 3 u 8)
2 one screw
(+BVTP 3 u 8)
3 filament tape
8 CDM block
4 flexible flat cable
(24 core) (CN8001)
5 flexible flat cable
(5 core) (CN8401)
6 CN8400 (6P)
7 Remove the CDM section
in the direction of the arrow.
Note 2: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector connector
OK NG NG
Note 1: When installing the flexible flat
cable, ensure that the colored line
is not slanted after insertion.
colored line
Insert is straight to the interior.
connector
OK
colored line
Insert is incline
connector
NG
flexible flat
cable
flexible flat
cable
1 four screws
(BVTP3 u 8)
7 CDM90-DVBU204//M
3 Draw two wires out of
the hole in bracket CDM
section.
6 bracket CDM section
4 cushion, saranet (30X50)
5 core, ferrite
2 Draw wire out of
the hole in bracket CDM
section.